How to Restart Your Terminal

There are two ways to restart your PAX A920Pro terminal:

1. Hold the power button on the right hand side of the terminal for 2 seconds.

2. From the icons that appear, select the Restart icon.

3. This icon will then be highlighted in the middle of the screen, click on Restart again to initiate the reboot.

4. The terminal will then restart.

1. If the Soft Restart did not work or was not responsive, the terminal may require a hard reboot.

2. Turn the Terminal over, and locate the battery cover (the cover of the bottom half of the terminal).

3. Slide the battery cover latch to the right, towards the unlock icon.

4. Lift the cover off.

5. Lift the bottom of the battery up and away from the terminal. This will shut off all power to the terminal.

6. Wait 5 seconds, then reconnect the battery and battery cover, ensuring that the battery latch is slid to the left towards the locked icon.

7. Ensure the battery and battery cover is firmly in place and secure prior to further use.

8. Press and hold the power button on the right hand side of the terminal to turn the device back on.